Restrictions: You must be eighteen (18) years of age, and possess a valid credit card to purchase our products. we will not sell products to minors. We reserve the right to cancel any sales transaction based on our sole discretion where we reasonably believes the purchaser is purchasing products on behalf of a minor.
Warning: Keep cartridges and fluid out of reach from children. Nicotine in its pure form is a poison, and can cause harm. All nicotine cartridges and fluid must be kept in a safe place and away from children, as the amount of nicotine in a cartridge, if ingested by a small child could cause serious harm and medical assistance should be sought.
The Vamo works like a charm. Easy to operate and offers unsurpassed value for money.
For the price, this is simply one of the best functioning mods on the market. No pressing buttons endlessly to change a setting. Very logical operation of the main setting.
If you have been wanting to try a mod with both variable voltage and variable wattage / power at an affordable price (unlike a provari), then this is the mod for you.
The Vamo Mod can be operated in 2 modes. A short one if you do not like big mods
and a full standard mode.
The short mode accommodates 1x 18350 battery, the standard longer mode takes either 2x 18350 batteries or 1x 18650 battery.
Unlike a Zmax or Vmax. Operation of the Vamo is fairly simple.
There are two modes of operation to help you set power output to the perfect level.
1) Variable voltage - adjust the voltage output for the VAMO from 3.0 to 6.0 volts in .1 volt increments.
2) Variable wattage - set the preferred wattage (from 3 to 15 watts) and the APV will adjust the voltage automatically no matter what atomizer you use.
Press the right button to increase voltage or power / wattage, press the left button to decrease voltage / power.
Press and hold the right button to read how many ohms is your atomizer.
Press and hold the left button to read how much power is left in the battery.
Press both the small buttons at the same time for 3secs and you can switch between variable voltage to variable wattage / power.
5 clicks of the big button will switch your Vamo off / on.
NOTE: The VAMO allows the user to alternate methods used internally to calculate the voltage output. The default and recommended setting is RMS (No.2). RMS provides a more accurate voltage output. The VAMO may also run in Average (or Mean) mode. Average mode may result in output voltages than displayed. To switch modes, hold either the power up or power down button for 10 seconds. The display screen will display N01 for AVG mode or N02 for RMS mode. To change the mode, release the adjustment button then press and hold for an additional 10 seconds to change to the alternate mode.
Can’t be any simpler than that!
Remember the key to vaping / electronic smoking is to take slower & longer puffs / drags.
Warning! Do not leave batteries charging overnight or unattended
Suitable for Vamo and many other mods.